Brilliance Everclear is a water-based antiskid care product for finished parquet and hardwood flooring, finished cork (closed-porous) surfaces, PVC and linoleum

Brilliance Everclear is a water-based antiskid care product for finished parquet and hardwood flooring, finished cork (closed-porous) surfaces, PVC and linoleum. Giscode: GE10.

• Brilliance Everclear Stop is a product with a special antiskid effect, its slip friction coefficient corresponds to DIN 18032 and should be used whenever increased non-skid properties of the floor are required.
• Brilliance Everclear Antistatic reduces the electrostatic charge of finished hardwood flooring.
• Brilliance Everclear should be used on floors with intact finish films only, otherwise the wood is liable to turn grey as a result of water penetration.

Note: as a rule, a finished floor should be treated with Brilliance Everclear after 8-10 days only. The service life of the finish strongly depends on the careful treatment of the floor during the first days. Prior to the first intensive use at the latest, the floor must be treated as described under item „First and basic maintenance“. Depending on its use, every finish is subject to natural wear. For this reason, regular maintenance is absolutely essential. If the surface is damaged by use, the floor must be sanded completely and recoated. This measure is also part of the maintenance of finished floors and should be carried out in due time. Puddles should be avoided and saturated cloths or pads should not be left on the flooring in order to avoid discolorations.

Impregnated floors should be treated with Brilliance AquaSatinPolish, Brilliance Pflegeöl or Brilliance Fitpolish as they are liable to turn grey due to water penetration. Basic cleaning is necessary whenever the maintenance system is changed.

Application: shake well before use. Brilliance Everclear can be used in two methods:

First and basic maintenance: the first coat of Brilliance Everclear after finishing or after every basic cleaning is evenly and undiluted applied to the floor. Consumption: approx. 30-40 ml/m2 (undiluted). Use lintfree cloths or our special wiper Wischwiesel for application. Please note that, when using Brilliance Everclear Stop to avoid costly basic cleaning, make a first-time care with the standard setting of Brilliance Everclear.

Regular maintenance: for regular cleaning and care, 0,2–0,3 l of Brilliance Everclear is added to about 8-10 l of water and the floor is wiped with a damp cloth or mop.

Basic cleaning: Brilliance Everclear forms a film on the floor. Depending on the frequency and intensity of maintenance, the film must be removed either manually or by means of a machine using Brilliance Cleaner L94 (wax-remover). Generally, basic cleaning is required whenever the floor is unsightly or heavily soiled with impurities which cannot be removed by normal cleaning.

Important note! Do not soak the floor with water during maintenance or basic cleaning as swelling of the wood may lead to damages.

Storage/transport: shelf life of original unopened packing 24 months min. provided that material is transported and stored at a cool and dry place protected from freezing.

Store in a dry, well-ventilated place at a temperature between 15 ° C and 25 ° C. Protect from heat and direct sunlight. Keep tightly closed.

Industrial-coated prefinished hardwood floors.

When used as a full care on engineered parquet and laminate, the liability must be checked on a case by case basis. Also, an edge protection with Brilliance FillAndFinish may be required in advance. Observe the recommendations of the pre-finished parquet manufacturers.