WOCA Maitenance Oil – this oil is intended for the restoration and care of all oxidized, oiled wooden surfaces

Application

Maintenance Oil is used for the restoration and care of all oxidized oiled wooden surfaces. The product is particularly suitable for the regular care of oiled wooden floors. Intended for application both manually and with a polishing machine, on surfaces larger than 8-10 m². The product is suitable for all types of wood, highlights the natural structure of the wood, gives the wood a beautiful and breathable surface.

Certificates: Certifikat IBR, Danish Indoor Climate Label, TVOC28/A+.

Consumption

Approximately 30-40 m²/l per coat.

Instructions for use

1. The temperature of the product, room, floor should be approximately +15-35 °C.

2. Ensure good ventilation during application and drying, open windows, doors, etc.

3. Wash the surface with WOCA Intensive Wood Cleaner. After washing the surface, it should be left to dry completely for about 8 hours.

4. Before using the product, we recommend testing the product in a less visible area to ensure the compatibility of the product with the treated surface.

5. The oil should be stirred thoroughly before use.

6. The required amount of oil, approximately 100 ml per 4 m², should be applied to the surface with a pad, brush, cotton cloth or roller. Apply in small areas. Larger areas should be covered with a polishing machine.

7. Then leave the surface for 10-20 minutes so that the oil is absorbed into the wood.

8. Next, polishing should be carried out. The oil should be rubbed into the wood. The oil should be applied to the surface and polishing should be continued until the surface is even and saturated.

9. Wipe off any oil that has not absorbed into the wood with a well-absorbent cloth. Do not leave any oil residue on the surface.

10. The surface should then be polished again with a white polishing felt or wool cloth, either manually or with a polishing machine.

11. Very absorbent surfaces will require several coats of oil.

12. Drying: if the product is applied with a polishing machine, the surface will be dry after approx. 4 hours at 20°C. If the product is applied manually: after approx. 24-48 hours, at normal room temperature, the surface will be dry.

Technical data

Composition: vegetable oil components, isoparaffins, pigments.

Density: 0.80-0.90. Solids: approx. 50%.

Shelf life: 36 months.

Cleaning of tools: with Woca Solvent or turpentine.

Storage

+10-25°C. Keep out of reach of children. Do not store in rooms with
high air temperatures, direct sunlight, frost.

VOC: this product contains a maximum of 490 g VOC/l, the limit value is 700 g VOC/l (Cat A/f OB).

Migration test: EN 71-3:2013.