Avalon Mobelpolitur – deep impregnating agent for furniture

For the care of oiled, waxed and lacquered surfaces. Water repellent finishing coat, high impregnation. Migration behaviour tested according to DIN EN 71, part 3. Saliva- and perspiration resistant according to DIN 53160.

Test the product on surfaces which have not been treated with Avalon products before first. Do not use on surfaces treated with polystyrol.

Colour 

Colourless to slightly yellow coloured.

Ingredients

Linseed oil, ricinen stand oil, linseed stand oil, natural resin ester, isoparaffinic hydrocarbons, drying agents. Product contains max 330 g/l VOC. EU limit value for this product (cat. f): 700 g/l (2010).

Hazard statements

May be fatal if swallowed and enters airways.

GHS08

Application 

Stir well before use. The surface must be dry (humidity of the wood max 14%), clean and free of dust and grease. Apply thinly and evenly by a clean and soft cloth in fibre direction. Always apply a test coat, especially for surfaces not treated with Avalon product beforehand. Not suitable for synthetic surfaces made of polystyrene.

Packaging and consumption

Approx. 10 ml/m2.

Packaging: 0,25 l

Storage 

Originally sealed at least 5 years stable. Store dry, cool and sealed.

Store in a dry, well-ventilated place at a temperature between 15 ° C and 25 ° C. Protect from heat and direct sunlight. Keep tightly closed.

Disposal

According to locally regulated laws. European Waste Catalogue (EWC) 07 06 01.

Cleaning up 

With oil solvent Avalon.

Precautionary statements 

Keep out of reach of children. IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. Do NOT induce vomiting. Avoid release to the environment. Dispose of contents/container according to local regulations.

Always be sure to store cleaning cloth, polishing pads, sponges, etc. that are still wet or even slightly moist with product in an airtight metal container or in water and dispose, as there is a danger of spontaneous combustion caused by the plant oil content in the product. The product alone will not undergo spontaneous combustion. A typical smell may arise due to the natural raw materials. During sanding wear mask against respirable dust.