Avalon Fußboden und Möbelwachs – natural wax for floors and furniture

For open-pored finishing and water repellent protection of all interior areas exposed to wear and tear, especially wood, cork and unglazed clay tiles in the floor area as well as for high-quality furniture treatment.

Unctuous consistency, high-yield. Easy to repair by subsequent treatment. Water vapour permeable.  Migration behaviour tested according to DIN EN 71, part 3.

Colour 

Yellowish, colourless.

Ingredients

Walnut oil, safflower oil, carnauba wax, bees wax, natural resin-ester, dring agents. The VOC content of this product is max. 1 g/l. EU limit value max 400 g/l (class “e” 2010).

Application 

Apply by cloth or single disk machine using white or brown felt/pad.
Ambient and surface temperature must be higher than +15° C.

Drying time

Ready for polishing after approx. 12 hours. Ready to walk over after approx. 48 hours. Fully hardened after approx. 1 week. This system needs sufficient quantities of atmospheric oxygen for drying. Provide adequate ventil-ation for interior application, in case of a lack of ventilation use a ventilator to avoid the built up of odour.

Packaging and consumption

Approx. 5 – 10 g/m2 per coat or 100 m2 with 1 kg.  Apply sparingly to avoid delays or problems within the drying process!

Packaging: 0,175 kg for 23 m², 0.35kg for 46,5 m², 2,1kg for 280 m²

Storage 

Originally sealed at least 5 years stable. Store dry, cool and sealed.

Store in a dry, well-ventilated place at a temperature between 15 ° C and 25 ° C. Protect from heat and direct sunlight. Keep tightly closed.

Disposal

According to locally regulated laws. European Waste Catalogue (EWC) 08 01 12.

Cleaning up 

Clean surfaces with neutral detergents in lukewarm water. Clean equipments immediately after use with solvents.

Precautionary statements 

Keep out of reach of children.
Avoid release to the environment. Dispose of contents/container according to local regulations.
Always be sure to store cleaning cloth, polishing pads, sponges, etc. that are still wet or even slightly moist with product in an airtight metal container or in water and dispose, as there is a danger of spontaneous combustion caused by the plant oil content in the product.
The product alone will not undergo spontaneous combustion. A typical smell may arise due to the natural raw materials. During sanding wear mask against respirable dust.

Safety data sheet available on request.