Quickly drying gel-like trowel compound based on water-thinnable acrylate polyurethane dispersions. AquaSeal SpachtelGel is almost odourless, inflammable and suitable as intermediate coat for our water- based AquaSeal finishes. Please refer to the individual Technical Data Sheets of the finishes.

The gel-like consistency of the material achieves closed surfaces and covers small joints resulting in an excellent filling capacity and a brilliant visual effect. Compared with finishes, the drying time of AquaSeal SpachtelGel can quickly be sealed over. Giscode: W2+

Application

The material is applied in 2 cross-trowel coats with stainless trowel. After drying, the surface is re-coated without sanding. The work method must be adapted to the use of the floor.

Drying

Standard climate 23°C/50% rel. humidity: Surface can be recoated after approx. 30–60 min. Insufficient ventilation, low temperatures, high humidity or increased coat thickness may delay drying considerably. Prior to recoating, the surface must be sufficiently dry.

Consumption

Depending on floor surface and working method: 1 intermediate coat: approx. 15-20 ml/m2 resp. approx. 60 m2/l

Storage/ Transport

Shelf life of original unopened packing 15 months min. provided that material is transported and stored at a cool and dry place protected from freezing.

Store in a dry, well-ventilated place at a temperature between 15 ° C and 25 ° C. Protect from heat and direct sunlight. Keep tightly closed.